Description
โดรนจิ๋วบรัชเลส 2S ที่มาพร้อมความแรงของมอเตอ์ 803 16000kv ความพิเศษตรงที่เป็น 2S ที่ใช้บอร์ดเดียวทำให้น้ำหนักเบาขึ้นกว่าเดิม
จุดเด่นของรุ่นนี้
· เพิ่มความตื่นเต้นให้กับการเร่งที่เร็วกว่าเดิม ด้วยมอเตอร์ขนาด 7x16mm 17,500KV และใบพัด 3 ใบ
· โดรนสไตล์ Tiny Whoop ที่เป็นที่นิยมมาอย่างยาวนาน
· มีรีซีฟให้เลือกใช้ถึง 3 ตัว รวมถึง FrskyRX อีกด้วย
Spare parts specifications:
| Motor | Mode: SE0802 KV16000 Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.5mm Weight(g):1.8g No.of Cells(Lipo):1S-2S |
| Flight controller | (Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR (Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FSX (Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 3.5-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver Frsky EU-LBT version Built-in External XM+ receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter Built-in voltage detection BLHELI_S pass-through Ready Heading LED Ready |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.Hex Default protocol: DSHOT600 |
| Frsky NON-EU receiver Version | SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| Flysky receiver Version | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
| DSM2/DSMX receiver version | Serial bus receiver Protocol: DSM2/DSMX compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| Frsky EU-LBT Version( External XM+ receiver) | Operating Voltage Range: 3.7~10V Operating Current: 30mA @5V Operating Range: Full range With RSSI output on board: Analog 0~3.3V Firmware Upgradeable, Default firmware EU-LBT with RSSI |
| AIO Camera&VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible) Size: 13.9″12.0mm ( L*W ) Weight: 3g |
| Lipo Battery | Capacity:250mAh Voltage:3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 55mmx12mmx7mm Weight: 6.5gConnector: PH2.0*Notes: Need 2pcs batteries for Series circuit |
Standard Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery
1x Screwdriver