Features:
AIO Flight controller with ELRS Receiver and 5.8G VTX
Super light 1S 65mm Brushless whoop only 18.7g
Equipment with the lightest brushless motors-SE0702 only 1.46gram
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Specifications:
Brand Name: Happymodel
Item Name: Mobula6 ELRS 1S 65mm Brushless whoop drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*37mm
Weight: 18.7g
Receiver option:
2.4GHz ExpressLRS SPI receiver
Mobula6 ELRS 2.4G Standard version | Mobula6 ELRS 2.4G Race version | Mobula6 ELRS 915MHz | Mobula6 ELRS 868MHz | |
Flight controller | ELRS F4 2G4 | ELRS F4 2G4 | CrazyF4 ELRS | CrazyF4 ELRS |
Firmware target | CRAZYBEEF4SX1280 | CRAZYBEEF4SX1280 | CRAZYBEEF4DX | CRAZYBEEF4DX |
Built-in ExpressLRS receiver | SPI 2.4GHz | SPI 2.4GHz | Serial-base 915MHz | Serial-base 868MHz |
Built-in Dshot ESC | 5A | 5A | 5A | 5A |
Receiver antenna plug | SMD ceramic antenna | SMD ceramic antenna | IPEX MHF3 | IPEX MHF3 |
Onboard VTX power | 25mw-400mw | 25mw-400mw | 25mw-200mw | 25mw-200mw |
Brushless Motor | SE0802 KV19000 | SE0802 KV25000 | 0702 KV26000 | 0702 KV26000 |
Propeller | Gemfan 1210 Bi-blade | Gemfan 1210 Bi-blade | Gemfan 1210 Bi-blade | Gemfan 1210 Bi-blade |
Battery | 1s 300mah Lipo battery | 1s 300mah Lipo battery | 1s 300mah Lipo battery | 1s 300mah Lipo battery |
Package includes:
Item Name | Qty |
Mobula6 1S 65mm whoop Drone Frame | 1 |
ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver | 1 |
CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver | |
CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver | |
SE0702 KV26000 brushless motor or SE0802 KV19000 or SE0802 KV25000 | 4 |
Gemfan 1210 31mm bi-blade propellers(4cw+4ccw) | 1 |
Runcam Nano3 1/3 CMOS 800TVL camera | 1 |
Onboard 5.8G 25mw~200mw VTX | 1 |
1S 300mah 30C LiHV Battery | 4 |
1S Lipo/LIHV USB Charger | 1 |
Propeller disassemble tool | 1 |
Spare parts specifications:
Motor | Mode: SE0702 KV26000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ9.5mm*14mm Weight(g):1.46g No.of Cells(Lipo):1S only |
Propellers | Weight:0.19g Material:PC Pitch:1 inchProps Dia:30mm Center Hole Dia:1mm |
Flight controller | ELRS F4 2G4 flight controller V3.1 built-in SPI expresslrs 2.4G receiver CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in ExpressLRS 2.4G/915MHz/868MHz receiver Built-in 5V 1A BEC Built-in voltage detection |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 |
Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna : SMD antenna Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRS Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible |
Onboard Serial-based ELRS Receiver | Operation current: ~100Ma Rx To FC protocol: CSRF RF Frequency optional: 915mhz or 868mhz(EU) Antenna connector: IPEX4 Telemetry output Power: <17dBmFirmware target: Happymodel_RX_ES915RXReceiver protocol: CRSF Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware) Firmware flash via Betaflight pass-through |
Onboard 5.8g VTX | Output power: 25mw~200mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race bandSmartaudio ready |
Runcam Nano3 | Model: RunCam Nano 3 Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
Lipo Battery | Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8gConnector: PH2.0 |